During the winter, water heaters often stop working due to the cold temperatures. This is a particularly bad time to have this happen for self-evident reasons. In the chaos of an early morning shower gone wrong or a similar problem, it can be difficult to know what to do. You must think quickly to overcome the issues that are associated with the lack of warm water. For this reason, it is best to plan ahead. You should use these steps to cope with the situation.
Check for Water Leaks
Water heaters that are old can begin to leak water from the holding tank, and this can lead to a massive amount of water damage. Check around the water heater. If water is leaking from the holding tank, then you should begin to place old towels on the floor around the item to avoid additional damage to the floor tiles and walls. You might find a bit of water even if the heater is not leaking. So, if a leak is not immediately visible, check for other signs of leakage, such as wet fittings. There are also water-suctioning machines that you can rent to remove water from the drywall and the floors.
Turn Off the Water Valves
Look for the water valve that is located on the intake pipe at the top of the water heater to turn it off. This will stop the flow of additional water into the appliance, but the water that is in the water heater will remain in the tank or it will continue to drip from the rusty metal of the holding tank. If you can’t find the water valve above the water heater, then you will need to turn off your home’s main water valve. However, this will also keep you from having any cold water in your home.
Contact a Knowledgeable Plumber
It is better to have professional water heater installation service from knowledgeable plumbers who understand how to choose the proper type of appliance for your home. There are water heaters that work with electricity or natural gas, and this requires the proper installation techniques to ignite the pilot light in the appliance. The plumbers will also remove the old water heater to throw it away according to local regulations. When you receive your new utility bill, you may notice that the cost of heating the water is less than before. This is because modern water heaters are more efficient, helping you to save money each month.
Adjusting the Water Heater’s Temperature
After replacing the malfunctioning water heater, you will need to adjust its settings to have the proper temperature of water. The plumbers may set the water heater at its highest setting to heat the water in the tank quickly so that you have hot water as fast as possible. It is a good idea to reduce the temperature of the water heater to a normal setting so that you don’t incur an injury from the extremely hot water. With the water heater at a moderate setting, you can enjoy hot water throughout the winter so that you can wash dishes and bathe.
Not having hot water in the winter, even for a brief period of time, can be stressful. It is, at best, a serious inconvenience. Luckily, you can find ways to cope while your heater is repaired or replaced. Having a plan ahead of any trouble and having a plumber ready to call can help smooth over the stress and make things right as quick as possible. Look over the above tips to be prepared if your water heater ever breaks.
Author Bio: This article has been shared by Lizzie Weakley who is a freelance writer from Columbus, Ohio. In free time, she likes outdoors and walks in the park with her three-year-old husky, Snowball. She recommends this water heater installation service.