The latest strategy to make excellent finishing is powder coating. It is a procedure of applying a coating without the need to use solvents. This is like applying dry paint on the surface. Rather than paint, in any case, pigmented powder created from aluminium, medium density fibreboards, fusion-bonded epoxy and acrylics are used to fabricate polymer granules. They are mixed with powder ingredients and pigments to deliver the desired colour.
This is best done by an expert company. In any case, numerous new companies publicizing on the web that offer low-cost options in the place of branded ones. These companies don’t have the experience, financial assets, or specialised expertise to provide equipment that will be sound speculation to your shop.
The reputed companies like PB Metal Finishing Systems have a broad experience in configuration, designing, and product maintenance. This investment guarantees that their items are safe and work properly and will be supported for quite a long time after the sale. By taking shortcuts around these basic strides, which are both costly and tedious, some of the new startups have introduced new products to the marketplace. They offer low costs, however, the gear represents a poor value in general.
We have listed a few things which should be remembered before you buy coating equipment from any company.
- Ensure that the company you hire is licensed and has insurance on their business. Make sure they strictly build coating equipment and are not just a “side business” to help get extra cash? The majority of the significant brands are manufactured by companies that focus exclusively on assembling and supporting coating equipment. While looking out for companies, you will most probably find out that most have pricing and lead times that are comparable. Most manufacturers of extensive coating systems have lead times of 2-14 weeks. Smaller systems may take up to a month and a half to convey. Lead times that appear to be very long, or very short, should be avoided.
- Ensure that the manufacturer has the necessary liability insurance for the products they are manufacturing. If they don’t, any harm that is caused by their hardware in your place of business will most likely not be secured by your insurance agency.
- If your oven isn’t manufactured appropriately, you will probably face problems with “hot and cool spots.” This can leave your part with an uneven fix. It likewise causes your fuel expenses to go up since you need to get the coolest area of the part up to the proper curing temperature. Uniform heating is basic to fuel productivity. Every established brand of gas-fueled ovens uses either overhead or side-mounted duct to introduce hot air into the oven. Be careful with any design where hot air blasts directly into the oven through the rear wall or just a one-side wall. Also, pay attention to the exhaust system that is utilized. Gas ovens must have a power exhaust of a proper size. Too small of an exhaust is hazardous and won’t meet code. Too large of an exhaust wastes cash by drawing excessive hot air out of the oven.
- More essential than fuel productivity is safety. The codes that govern the manufacture, installation and function of curing ovens are very strict. A poorly built oven can cause property harm, damage, or death. If you are in a zone where you are dealing with code inspectors, it is pretty much possible that you will have your hardware “red labelled” and won’t be permitted to use it if it doesn’t meet code. There are innumerable situations where shop owners have either needed to perform costly changes or expel no-name hardware and replace it with new gear from an established manufacturer before being able to operate their coating system.
- Approach each vendor you are considering for at least five references who have purchased a booth or oven from them and have been using the system for no less than two years. When you call the references, get some information about equipment downtime, maintenance and repair expenses, and support after the sale. Ordinarily a shop owner or coating professional will be significantly more transparent about how the equipment works than the price they paid for it.
By Suzanne Elly
who is a blogger, content marketer and editor with experience in a diverse range of industries. Her work has been published in various blogs, websites, and magazines on the web. Suzanne has in-depth experience writing on business and marketing topics in Asia, North America and Europe. When not writing, Suzanne can usually be found voraciously reading or caring for her three kids, Whinney, Adam, and Alex.
All images and content mentioned herewith have been shared by the authors/contributors. We do not hold any liability for infringement or breach of copyright of third parties across the spectrum. Pictures shared by authors/contributors are deemed to be authorized by them likewise. For any disputes, we shall not be held responsible.